RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Cobra logo


Copyright logo


Last modified 2024-10-30

Valid HTML 4.01 Transitional

Cobra 29 XLR (By Dynascan)

A picture of Cobra 29 XLR (By Dynascan)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.265-27.405 MHz
Channels / tuning steps:40
Mode:AM
Frequency control:PLL (uPD858C)
Frequency stability:0.005% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:±1.5 KHz
Power supply:13.8 VDC (Male 3-pin jack)
Current drain / power consumption:RX: 0.3-1.2 A
TX: Max 1.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):185*56*242 mm (7.28*2.2*9.53")
Weight:2.27 Kg (5 lb)
Other features:PA. ANL/NB. Hi-cut filter. Dimmer. SWR-meter.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:<1 uV (10 dB S+N/N)
Squelch sensitivity:Less than 1 uV (Treshold)
Selectivity:7 KHz (-6 dB)
10 KHz (-60 dB)
Image rejection:50 dB
AF output power / speaker:3 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




TRANSMITTER SECTION
RF output power:4 W
Modulation system:High- and low-level Class B amplitude modulation
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan (Early) and Taiwan (Later), 197x-197x (Discontinued)
Main PCB:PC-198 By Uniden
Sub PCBs: PC-181 - Mike jack board
PC-207 - Channel selector board
Additional info:
Related documents: User manual (5.5 MB)
Service manual (3.8 MB)
RF driver: 2SC2091
RF final: 2SC2092
Market / Approval: USA
FCC Data: 29XLR
Sams Photofact #:s
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Cobra 29 XLR (By Dynascan)