RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Pearce-Simpson logo


Copyright logo


Last modified 2022-01-20

Valid HTML 4.01 Transitional

Pearce-Simpson Tiger Mark 2

A picture of Pearce-Simpson Tiger Mark 2

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range: 26.965-27.255 MHz (Early)
26.965-27.405 MHz (Later)
Channels / tuning steps:23 (Early)
40 (Later)
Mode:AM
Frequency control:PLL (PLL02A)
Frequency stability:
Clarifier or Delta tune:±? KHz "Receiv-o-slide"
Power supply:13.8 VDC (2-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:PA. ANL/NB.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:0.7 uV (10 dB S/N)
Selectivity:
Image rejection:
AF output power / speaker:3 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:4 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -50 dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Main PCB:PTBM033AOX or PTBM039AOX by Cybernet Electronics Corporation
Sub PCBs:
Additional info:
Related documents: User manual (3.6 MB)
PLL: PLL02A
Sams Photofact #:CB-125 (June 1977)
Modifications and fixes:
Reviews:
Options / Accessories:
- -