RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next HF and more


Copyright logo


Last modified 2023-09-17

Valid HTML 4.01 Transitional

Yaesu FTDX-3000

A picture of Yaesu FTdx-3000

SPECIFICATIONS

GENERAL
Type:Amateur HF/VHF transceiver
Frequency range: TX: 10-160 m + WARC / 6 m
RX: 0.03-56 MHz
Tuning steps:1 / 10 Hz (AM/SSB/CW)
100 Hz (FM)
Frequency stability:±0.5 ppm @ -10 to +50°C (14 to 122°F), after 1 minute warmup
Mode:AM / FM / SSB / CW / RTTY / Packet
Channels / memory management: 99 regular with alpha tags
5 QMB
9 scan edge pairs (PMS)
Non-volatile EEPROM storage
Repeater shift / offset: 10 m: 0-1 MHz in 50 KHz steps
6 m: 0-4 MHz in 10 KHz steps
Power supply:13.8 VDC ±10%
Current drain / power consumption:RX: Max 2.1 A
TX: Max 23 A
Antenna impedance / connector:50 ohm / Three SO-239
(16.7-150 ohm HF and 25-100 oh 6m with ATU on)
Dimensions (W*H*D):365*115*312 mm (14.37*4.53*12.28")
Weight:10 Kg (22.05 lb)
Other features: Hi-perf crystal roofing filters. 3.5 inch TFT. High speed spectrum scope.
32 bit IF-DSP. 9 MHz IF output. Automatic antenna tuner. CAT control.
CTCSS/PL. USB and µ-tune ports.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 9 MHz
2nd IF: 30 KHz (24 KHz for AM/FM)
Sensitivity: AM (BW: 6 KHz, 10 dB S+N/N)
0.5-1.8 MHz: 28 uV
1.8-30 MHz: 2 uV
50-54 MHz: 1 uV
FM (BW: 15 KHz, 12 dB SINAD)
28-30 MHz: 0.5 uV
50-54 MHz: 0.35 uV
SSB (BW: 2.4 KHz, 10 dB S+N/N)
0.5-1.8 MHz: 4 uV
1.8-30 MHz: 0.16 uV
50-54 MHz: 0.125 uV
Selectivity: WIDTH: Center

AM
6 KHz (-6 dB)
15 KHz (-60 dB)
FM
15 KHz (-6 dB)
25 KHz (-60 dB)
SSB
2.4 KHz (-6 dB)
3.6 KHz (-60 dB)
CW/RTTY/PKT
500 Hz (-6 dB)
750 Hz (-60 dB)
Image rejection:70 dB (HF)
60 dB (6 m)
AF output power / speaker:2.5 W at 10% distortion / 4 ohm
External speaker connector:3.5 mm, 4-8 ohm




TRANSMITTER SECTION
RF output power:

HF6 m
AM:2-25 W2-25 W
FM:5-100 W5-100 W
SSB (PEP):5-100 W5-100 W
CW:5-100 W5-100 W
Modulation system: AM: Low-level (Early stage)
FM: Variable reactance
SSB: Balanced
Max FM deviation (Factory set):Normal: ±5 KHz
Narrow: ±2.5 KHz
Spurious emissions:Better than -60 dB (HF)
Better than -65 dB (6 m)
Microphone impedance / connector:200 ohm to 10 Kohm (600 ohm nominal) / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 2012-20xx
Additional info:
Related documents: User manual (35.7 MB)
CAT control reference (210 KB)
Preliminary brochure (488 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Yaesu FTdx-3000