RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next HF and more


Copyright logo


Last modified 2023-09-17

Valid HTML 4.01 Transitional

Yaesu FT-75

A picture of Yaesu FT-75

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: 10-80 m in five bands:
3.5-4.0 MHz (80 m) in a 100 KHz segment
7.0-7.5 MHz (40 m) in a 100 KHz segment
14.0-14.5 MHz (20 m) in a 150 KHz segment
21.0-21.5 MHz (15 m) in a 240 KHz segment
28.0-30 MHz (10 m) in a 400 KHz segment
Tuning steps:VXO ±3 to ±6 KHz (Depending on band)
Frequency stability:±? ppm
Mode:SSB / CW
Channels / memory management: 3 channels per band
Repeater shift / offset:No
Power supply:Various voltages from external PSU
Current drain / power consumption:RX: ? mA
TX: Max ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):210*80*300 mm (8.27*3.15*11.81")
Weight:3.8 Kg (8.38 lb)
Other features:NB.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 5.2 MHz
Sensitivity:20 m: 0.5 uV (10 dB S/N)
Selectivity:2.3 KHz (-6 dB)
4.5 KHz (-60 dB)
Image rejection:50 dB
AF output power / speaker:2 W at 10% distortion / 4 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

Max pwr
SSB (PEP):20 W
CW:20 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -40 dB
Microphone impedance / connector:Hi-Z / 7-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1971-197x (Discontinued)
Additional info:
Related documents: 12BY7A driver
12DQ6B final
Modifications and fixes:
Reviews:
Options / Accessories:
- -