GENERAL |
Type: | Amateur HF transceiver |
Frequency range: |
10-80 m in five bands:
3.5-4.0 MHz (80 m) in a 100 KHz segment
7.0-7.5 MHz (40 m) in a 100 KHz segment
14.0-14.5 MHz (20 m) in a 150 KHz segment
21.0-21.5 MHz (15 m) in a 240 KHz segment
28.0-30 MHz (10 m) in a 400 KHz segment
|
Tuning steps: | VXO ±3 to ±6 KHz (Depending on band) |
Frequency stability: | ±? ppm |
Mode: | SSB / CW |
Channels / memory management: | 3 channels per band |
Repeater shift / offset: | No |
Power supply: | Various voltages from external PSU (FP-75B or DC-75B) |
Current drain / power consumption: | RX: 0.3-1.95 A (@ DC-75B) TX: 6.7-15.5 A (@ DC-75B) |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 210*80*300 mm (8.27*3.15*11.81") |
Weight: | 3.8 Kg (8.38 lb) |
Other features: | NB. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Single conversion superheterodyne
IF: 5.2 MHz
|
Sensitivity: | 20 m: 0.5 uV (10 dB S/N) |
Selectivity: | 2.3 KHz (-6 dB) 4.5 KHz (-60 dB) |
Image rejection: | >50 dB |
AF output power / speaker: | 2 W at 10% distortion / 4 ohm |
External speaker connector: | |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
| High | Low |
SSB (PEP): | ~60 W (100 W input) | ~18 W (30 W input) |
CW: | ~50 W (100 W input) | ~15 W (30 W input) |
|
Modulation system: | |
Max FM deviation (Factory set): | No FM |
Spurious emissions: | Better than -40 dB |
Microphone impedance / connector: | Hi-Z / 6-pin (Metal locking ring connector) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 197x-197x (Discontinued) |
Additional info: |
Two 12GB7 finals
New price 1975 in Australia: $268.00 (AUD), with mike and five XTAL's
|
Related documents: |
User manual (212 KB)
12BY7A driver
|
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
DC-75B
FP-75B
FV-50
YM-86
|
DC power supply with built-in speaker
AC power supply with built-in speaker
External VFO
Dynamic hand microphone. 50 Kohm
|
|