| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
USA
TX: 220-225 MHz
RX: 215-239 MHz
|
| Tuning steps: | 5 / 10 KHz |
| Frequency stability: | ±10 ppm (No temperature reference) |
| Mode: | FM |
| Channels / memory management: |
10 regular with split
Priority function
1 call
|
| Repeater shift / offset: | ±1.6 MHz |
| Power supply: | 13.8 VDC ±10% |
| Current drain / power consumption: | RX: 450-700 mA
TX: Max 6.5 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 160*50*145 mm (6.3*2*5.71") |
| Weight: | 1.3 Kg (2.9 lb) |
| Other features: | Reversible sloped front panel. Data cloning. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 21.6 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.2 uV (12 dB SINAD) |
| Selectivity: | 15 KHz (-6 dB)
30 KHz (-60 dB) |
| Image rejection: | |
| AF output power / speaker: | 1.5 W at 5% distortion / 8 ohm |
| External speaker connector: | 3.5 mm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
|
| Modulation system: | Variable reactance |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -57 dB |
| Microphone impedance / connector: | ? ohm / 8-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 199x-199x (Discontinued) |
| Additional info: | |
| Related documents: | User manual (3.1 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
FP-700
FTS-12
MF-1A3B
MH-10E8
MH-10F8
MH-15D8
MMB-34
SB-10
SP-55
YH-1
|
Power supply with built-in speaker
CTCSS/PL encoder/decoder unit
Boom microphone with flexible arm
Standard hand microphone
Speaker-microphone
Hand microphone with DTMF and auto dial
Quick release mobile mounting bracket
PTT switch unit for MF-1A3B or YH-1
External speaker
Headset with microphone
|
|
