RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-16

Valid HTML 4.01 Transitional

Yaesu FT-3000M

A picture of Yaesu FT-3000M

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Europe
TX: 144-146 MHz
RX: 110-180 / 300-520 / 800-999 MHz
USA
TX: 144-148 MHz
RX: 110-180 / 300-520 / 800-999 MHz (Cellular blocked)
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz
Frequency stability:±5 ppm @ -5 to +60°C (23 to 140°F)
Mode:TX: FM
RX: AM / FM
Channels / memory management: 70 regular with alpha tags (5 characters)
1 home
5 scan edge pairs (PMS)
Priority function
Repeater shift / offset:±600 KHz (Programmable)
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 500-800 mA
TX: Max 15 A
Antenna impedance / connector:50 ohm / SO-239 (On pigtail)
Dimensions (W*H*D):140*40*180 mm (5.51*1.58*7.09")
Weight:1.25 Kg (2.76 lb)
Other features: CTCSS/PL encoder. DCS. ARTS. 1K2/9K6 packet jack. DTMF.
Spectrum scope. 1750 Hz tone call (Europe). Voice mail paging.
Dimmer. Cloning. MIL-STD 810. Dual cooling fans. Voltmeter.
Twin RX (VV/VU/UU).




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 45.05 MHz
2nd IF: 455 KHz
Sensitivity:VHF: 0.2 uV (12 dB SINAD)
UHF: 0.25 uV (12 dB SINAD)
Selectivity:15 KHz (-6 dB)
28 KHz (-60 dB)
Image rejection:70 dB
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm, 4-16 ohm




TRANSMITTER SECTION
RF output power:

HighLow 3Low 2Low 1
2 m:70 W50 W25 W10 W
Modulation system:Variable reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:2 Kohm / 6-pin (Modular)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1996-199x (Discontinued)
Additional info:
Related documents:User manual (5 MB)
Modifications and fixes:
Reviews:Practical Wireless: June 1996, page 21
Options / Accessories:
ADMS-2D
DVS-4
FP-800
FTS-17A
MH-36A6J
MH-42A6J
MMB-36
MMB-60
SP-7
Windows PC programming kit (Software and cable)
Digital voice recorder unit
AC power supply. 13.8 VDC, 20 A. Built-in speaker
CTCSS/PL decoder unit
Hand microphone with DTMF keypad
Hand microphone with up/down buttons
Mobile mounting bracket
Quick-release mobile bracket
External speaker