| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
TX: 144-148 MHz
RX: 144-148 MHz
|
| Tuning steps: | Channelized |
| Frequency stability: | ±0.001% |
| Mode: | FM |
| Channels / memory management: |
23 regular
1 call
XTAL controlled
|
| Repeater shift / offset: | Depending on XTALs |
| Power supply: | 13.5 VDC ±10% (2-pin metal locking ring conector) |
| Current drain / power consumption: | RX: 450 mA
TX: Max 2.6 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 165*60*225 mm (6.5*2.36*8.86") |
| Weight: | 2.5 Kg (5.51 lb) |
| Other features: | Repeater tone burst (Adjustable between 1300 to 3000 Hz). |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.3 uV (20 dB S+N/N) |
| Selectivity: | 30 KHz (-6 dB)
50 KHz (-50 dB) |
| Image rejection: | |
| AF output power / speaker: | 2 W at ?% distortion / ? ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
|
| Modulation system: | Phase modulation |
| Max FM deviation (Factory set): | ±5 KHz (Adjustable up to ±15 KHz) |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | ? ohm / 4-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 197x-197x (Discontinued) |
| Additional info: | |
| Related documents: | User manual (3.7 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
FP-2
|
AC power supply. Built-in speaker
|
|
