RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-16

Valid HTML 4.01 Transitional

Yaesu FT-227 "Memorizer"

A picture of Yaesu FT-227 ''Memorizer''

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Japanese domestic market
TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:10 / 20 KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 1 regular
Repeater shift / offset:No
Power supply:13.8 VDC ±10% (2-pin metal locking ring connector)
Current drain / power consumption:RX: 500-800 mA
TX: Max 2.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):180*60*220 mm (7.09*2.36*8.66")
Weight:2.7 Kg (5.95 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.3 uV (20 dB quieting)
Selectivity:12 KHz (-6 dB)
24 KHz (-60 dB)
Image rejection:
AF output power / speaker:1.5 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:10 W1 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1977-197x (Discontinued)
Additional info: This was Yaesu's first transceiver with a digital display.
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Yaesu FT-227 ''Memorizer''