GENERAL |
Type: | Amateur HF transceiver |
Frequency range: |
TX: 28.000-29.700 MHz
RX: 28.000-29.700 MHz
(26.000-30.000 after modification)
|
Tuning steps: | 100 Hz, 1 / 10 / 100 / 500 KHz |
Frequency stability: | ±300 Hz @ 25°C (77°F) |
Mode: | SSB / CW |
Channels / memory management: |
10 regular
|
Repeater shift / offset: | No |
Power supply: | 13.8 VDC ±15% (Male 3-pin jack) |
Current drain / power consumption: | RX: 0.5-1 A TX: Max 6 A |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 185*62*200 mm (7.28*2.44*7.87") |
Weight: | 1.9 Kg (4.19 lb) |
Other features: | NB. RIT (±1.5 KHz). |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Single conversion superheterodyne
IF: 10.695 MHz
|
Sensitivity: | 0.25 uV (10 dB S/N) |
Squelch sensitivity: | |
Selectivity: | |
Image rejection: | 65 dB |
AF output power / speaker: | 3 W at ?% distortion / ? ohm |
External speaker connector: | TS "Minijack" (3.5 mm) |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
| High | Low |
SSB (PEP): | 25 W | 5 W |
CW: | 25 W | 5 W |
|
Modulation system: | |
Max FM deviation (Factory set): | No FM |
Spurious emissions: | Better than -50 dB |
Microphone impedance / connector: | ? ohm / 8-pin (Male locking ring jack) |
Microphone input level: | 1 mV for 10 W SSB (PEP) output |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan and Philippines (By Uniden), 1988-199x (Discontinued) |
Additional info: | |
Related documents: |
User manual (3.4 MB)
Service manual (6.1 MB)
|
Modifications and fixes: | |
Reviews: | CQ: June 1989, page 46 |
Options / Accessories: |
|