RigPix logo

Other receiver & scanner brands logo


Back to main

Back to Other RX & scanners

Next SDR





Last modified 2014-09-14

CommRadio CR-1A

A picture of CommRadio CR-1A

SPECIFICATIONS

GENERAL
Type:SDR HF/VHF/UHF receiver
Frequency range:0.5-30 / 64-260 / 437-512 MHz
Can also receive 0.15-500 KHz with some limitations
Tuning steps:10 / 100 Hz / 1 / 10 / 100 KHz / 1 MHz
Mode:AM/FM/NFM/WFM/SSB/CW
Channels/memory management:64 regular
Power supply:6-18 VDC external or internal Li-Ion pack
Current drain/power consumption:? mA
Antenna impedance/connector:50 ohms / 2*BNC
Hi-Z / 3.5 mm jack
Dimensions (W*H*D):143*62*155 mm (5.64*2.43*6.1")
Weight:794 gr (1 lb 12 oz)
Other features:Dimmable 1.5" (64*128 pixels) OLED display.
I-Q sampling/32-bit DSP. Spectrum scope on HF.
Mini-USB jack (software update and battery charging).

Improved version with I/Q output. Can also be remote controlled
via the USB connector




RECEIVER SECTION
Receiver system:Single conversion superheterodyne (VHF/UHF)
IF: ? KHz
Double conversion superheterodyne (HF)
1st IF: ? KHz
2nd IF: ? KHz
Sensitivity:HF (BW 500 Hz): 0.125 uV (MDS)
108-150 MHz (FM BW 15 KHz): 2.8 uV (12 dB SINAD)
UHF (FM BW 15 KHz): 11.2-2.8 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power/speaker:0.8 W at ?% distortion / 8 ohms
External speaker connector:3.5 mm jack




MISCELLANEOUS
Manufactured:USA (By Aerostream), 2014-201x (Discontinued)
Additional info:New price 2014 in the US: $599.99
Related documents:User manual (1.3 MB)
Modifications:
Options/Accessories:
CR-1 Battery Internal Li-Ion battery
A rear picture of CommRadio CR-1A