| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
TX: 50-52 MHz
RX: 50-52 MHz
|
| Tuning steps: | TX: XTAL (VFO option)
RX: VFO, analog / continuous |
| Frequency stability: | ±? ppm |
| Mode: | TX: AM
RX: AM / SSB / CW |
| Channels / memory management: |
2 TX
XTAL controlled
|
| Repeater shift / offset: | No |
| Power supply: | Mains: 105-120 VAC
or 12-15 VDC |
| Current drain / power consumption: | RX: 4.25 A @ 12 VDC / 50 W @ 115 VAC
TX: 8.2 A @ 12 VDC / 105 W @ 115 VAC |
| Antenna impedance / connector: | 30-150 ohm / SO-239 |
| Dimensions (W*H*D): | ? mm (?") |
| Weight: | ? Kg (? lb) |
| Other features: | |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 10.6 MHz
2nd IF: 595 KHz
|
| Sensitivity: | 0.5 uV (6 dB S/N) |
| Selectivity: | 3 KHz (-10 dB) |
| Image rejection: | 44 dB |
| AF output power / speaker: | 3.5 W at 5% distortion / ? ohm |
| External speaker connector: | Screw terminals |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
Max 22 W (Input)
|
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / ?-pin (6.3 mm / 1/4") |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | USA, 196x-196x (Discontinued) |
| Additional info: | |
| Related documents: |
User manual (603 KB)
RF final: 2E26
|
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
