RigPix logo

Other ham radio brands logo


Back to main

Back to Other ham radios

Next HF and more


SGC logo


Copyright logo


Last modified 2024-11-06

Valid HTML 4.01 Transitional

SGC SG-2020

A picture of SGC SG-2020

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: Standard
TX: 10-160 m
RX: 1.8-30 MHz (0.4-1.6 MHz with BC filter bypassed)
Export
TX: 1.8-29.7 MHz
RX: 1.8-30 MHz (0.4-1.6 MHz with BC filter bypassed)
Tuning steps:10 Hz
Frequency stability:3 ppm per 10°C
Mode:SSB / CW
Channels / memory management: 20 regular
Repeater shift / offset:No
Power supply:10-18 VDC (13.6 VDC nominal)
Current drain / power consumption:RX: Max 400 mA
TX: Max 4.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):152*70*178 mm (6*2.75*7")
Weight:2 Kg (4.4 lb)
Other features:NB. PBT. Built-in iambic keyer.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 60 MHz
Sensitivity:0.5 uV (10 dB S+N/N)
Squelch sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:1 W at 3% distortion / 4 ohm
External speaker connector:TS "Minijack" (3.5 mm), 4 ohm




TRANSMITTER SECTION
RF output power:

Pwr
SSB (PEP):1-20 W
CW:1-20 W

Output power is slightly less above 25 MHz
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -50 dB (Ham bands)
Microphone impedance / connector:? ohm / 8-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:USA, 1997-200x (Discontinued)
Additional info:
Related documents:Manual (2.96 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of SGC SG-2020