Back to main

Back to Other ham radios

Next HF and more

Last modified 2014-01-28

Patcomm PC-16000

A picture of Patcomm PC-16000


Type:Amateur HF transceiver
Frequency range:TX: 10-160 m + WARC
RX: 1.5-29.9 MHz
Tuning steps:1 / 10 / 100 Hz
1 / 10 KHz
Mode:AM/SSB/CW/RTTY (FM option)
Channels/memory management:100 regular + scratch pad
Repeater shift/offset:
Power supply:13.8 VDC 10%
Current drain/power consumption:RX: 2.5 A
TX: Max 20 A
Antenna impedance/connector:50 ohms / 3*SO-239
Dimensions (W*H*D):362*89*343 mm mm (14.25*3.5*13.5")
Weight:6.8 Kg (15 lbs)
Other features:CW & RTTY decoder, Keyer, SWR-meter, Keyboard interface
RS-232C output, IF-shift, Manual notch for CW & RTTY,
DSP filtering system, DSP autonotcher and de-noiser, Clock

Receiver system:Double conversion superheterodyne
1st IF: 45 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (10 dB S+N/N)
Selectivity:Available bandwidths: 2.4 & 1.8 KHz, 500 & 250 Hz + RTTY filter (200 Hz)
Image rejection:>70 dB
AF output power/speaker:2.5 W at 10% distortion / 8 ohms
External speaker connector:

RF output power:AM: 25 W carrier
FM: 100 W DC (With FM option)
SSB: 100 W PEP
CW/FSK: 100 W DC
Modulation system:Unbalance DBM with in phase audio applied
FM: Direct modulation of 2nd oscillator (With FM option)
SSB: Passive double balanced modulator
CW: Direct generation with DDS controlling TX offset
FSK: Direct generation via computer control of DDS
Max FM deviation: ? KHz (With FM option)
Spurious emissions:Less than -50 dBc
Microphone connector/impedance:8-pin / ? ohms

Manufactured:USA, 1997-199x (Discontinued)
Additional info:
Related documents:
- -