GENERAL |
Type: | Amateur HF transceiver |
Frequency range: |
28.0-29.700 MHz (Standard)
25.165-29.700 MHz (After modification)
|
Tuning steps: | 1 / 10 / 100 KHz |
Frequency stability: | ±300 Hz (No temperature reference) |
Mode: | AM / FM / SSB |
Channels / memory management: |
|
Repeater shift / offset: | ±0-990 KHz |
Power supply: | Mains: 220 VAC or 12-15.9 VDC |
Current drain / power consumption: | RX: ? mA TX: Max 3 A |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 300*85*240 mm (11.81*3.35*9.45") |
Weight: | 3.4 Kg (7.5 lb) |
Other features: |
NB. Dimmer. 5 memories. 1750 Hz tone burst. Repeater offset.
Modulation and SWR meter.
|
|
|
|
|
RECEIVER SECTION |
Receiver system: |
? conversion superheterodyne
|
Sensitivity: |
AM: 0.5 uV (10 dB S/N)
FM/SSB: 0.25 uV (10 dB S/N)
|
Selectivity: |
AM/FM: 60 dB (Adjacent channel)
SSB: 70 dB (Adjacent channel)
|
Image rejection: | >70 dB |
AF output power / speaker: | 2.5 W at ?% distortion / 8 ohm |
External speaker connector: | |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
| Pwr |
AM: | 4 W |
FM: | 10 W |
SSB (PEP): | 12 W |
|
Modulation system: | |
Max FM deviation (Factory set): | ±? KHz |
Spurious emissions: | Better than -65 dB |
Microphone impedance / connector: | ? ohm / 6-pin (Metal locking ring connector) |
Microphone input level: | 1.5 mV (FM 1 KHz deviation or SSB 4 W PEP) |
|
|
|
|
MISCELLANEOUS |
Manufactured: | 200x-20xx (Discontinued) |
Additional info: | |
Related documents: | User manual (270 KB) |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
|