RigPix logo

Marine transceivers logo


Back to main

Back to Marine transceivers

Next Marine transceiver


Furuno logo


Copyright logo


Last modified 2024-10-13

Valid HTML 4.01 Transitional

Furuno FM-3000

A picture of Furuno FM-3000

SPECIFICATIONS

GENERAL
Type:Marine VHF transceiver
Frequency range: TX: 156.025-157.425 MHz
RX: 156.050-163.275 MHz
Tuning steps:Channelized
Frequency stability:±10 ppm @-20 to +60°C (-4 to +140°F)
Mode:FM
Channels / memory management: All US and international channels 10 NOAA weather channels
Duplex shift / offset:Automatic according to bandplan
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: Max 1.5 A
TX: Max 5.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):165*110*103 mm (6.5*4.33*4.05")
Weight:1.13 Kg (2.49 lb)
Other features: DSC. NMEA in/out. Dual/triwatch. Scanning. Intercom.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
Sensitivity:0.22 uV (12 dB SINAD)
Squelch sensitivity:0.22 uV (Typical)
Selectivity:75 dB (Adjacent channel)
Image rejection:
AF output power / speaker:4.5 W at 10% distortion / 4 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: High: 25 W
Low: 1 W
Modulation system:Variable reactance phase modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -70 dBc
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:2003-20xx (Discontinued)
Additional info:
Related documents:User manual (1.3 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
FM-3010
FM-3020
FM-3030
FM-3040
Remote control microphone with intercom function
Microphone extension cable, 6 m (20 ft)
Voice scrambler unit
Flush mount