| GENERAL |
| Type: | License free dual band PMR446 / LPD transceiver |
| Frequency range: |
446.00625-446.09375 MHz
433.075 - 434.775 MHz
|
| Tuning steps / channels: | PMR446: 8
LPD: 69 |
| Frequency stability: | ? ppm |
| Mode: | NFM / FM |
| Memory channels / management: | |
| Repeater shift / offset: | Simplex only |
| Power supply: | 4.8-6 VDC (Four R6/AA batteries or 800 mAh NiMH pack) |
| Current drain / power consumption: | RX: ? mA
TX: ? mA |
| Antenna impedance/connector: | 50 ohm / Fixed antenna |
| Dimensions (W*H*D): | 58*122*34 mm (2.28*4.8*1.34") |
| Weight: | 123 g (4.34 oz), without batteries |
| Other features: |
CTCSS/PL. Vibracall. VOX. Roger beep. Dual watch.
Five call tones.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 21.4 MHz
2nd IF: 450 KHz
|
| Sensitivity: | 0.35 uV (12 dB SINAD) |
| Selectivity: | 70 dB (Adjacent channel) |
| Image rejection: | |
| AF output power / speaker: | 300 mW at 10% distortion / ? ohm |
| External speaker connector: | 3.5 mm (Mono) |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
PMR446: Max 500 mW (ERP)
LPD: Max 10 mW (ERP)
|
| Modulation system: | |
| Max FM deviation (Factory set): | PMR446: ±2.5 KHz
LPD: ±5 KHz |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / 2.5 mm (3-conductor) |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | 200x-20xx (Discontinued) |
| Additional info: | |
| Related documents: | User manual (828 KB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
