RigPix logo

License free logo


Back to main

Back to License-free radios

Next PMR446


Binatone logo


Copyright logo


Last modified 2024-09-09

Valid HTML 4.01 Transitional

Binatone MR-200

A picture of Binatone MR-200

SPECIFICATIONS

GENERAL
Type:License-free PMR446 transceiver
Frequency range:446.00625-446.09375 MHz
Tuning steps / channels:8
Frequency stability:? ppm
Mode:NFM
Memory channels / management:None
Repeater shift/offset:Simplex only
Power supply:4.8-6 VDC (Four R03 / AAA alkaline or rechargeable batteries)
Current drain / power consumption:RX: ? mA
TX: ? mA
Antenna impedance/connector:50 ohm / Non-removable antenna
Dimensions (W*H*D):58*105*30 mm (2.28*4.13*1.18")
Weight:94 g (3.32 oz), without batteries
Other features:Ring tone. VOX. Scanning. Dual watch. Seconds counter.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.7 MHz
2nd IF: 450 KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:? mW at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:Max 500 mW (ERP)
Modulation system:
Max FM deviation (Factory set):±2.5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / Internal or external
Microphone input level:? mV




MISCELLANEOUS
Manufactured:China, 200x-200x (Discontinued)
Additional info:
Related documents:User manual (99 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -