RigPix logo

Kenwood/Trio logo


Back to main

Back to Kenwood/Trio

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-15

Valid HTML 4.01 Transitional

Kenwood TR-7200

A picture of Kenwood TR-7200

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:Channelized
Frequency stability:±? ppm
Mode:FM
Channels / memory management:23 regular (Two XTALs per channel)
Repeater shift / offset:According on XTALs
Power supply:11.5-16 VDC
Current drain / power consumption:RX: 400 mA (No signal)
TX: 1.2-2.7 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):180*60*240 mm (7.1*2.4*9.45")
Weight:2.5 Kg (5.5 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (26 dB S/N)
Selectivity:20 KHz (-6 dB)
40 KHz (-60 dB)
Image rejection:60 dB
AF output power / speaker:1 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm, 4-8 ohm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:10 W1 W
Modulation system:Variable reactance phase shift
Max FM deviation (Factory set):±15 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:500 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Additional info:
Related documents:User manual (5.6 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
PS-5 Power supply with built-in clock and timer