RigPix logo

Kenwood/Trio logo


Back to main

Back to Kenwood/Trio

Next mobile VHF/UHF


Copyright logo


Last modified 2024-12-10

Valid HTML 4.01 Transitional

Kenwood TR-7200G

A picture of Kenwood TR-7200G

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:Channelized
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 23 regular (Two XTALs per channel)
Repeater shift / offset:Accoring to XTALs
Power supply:11.5-16 VDC (Male 2-pin jack)
Current drain / power consumption:RX: 500 mA (No signal)
TX: 1.5-3 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):180*60*240 mm (7.1*2.4*9.45")
Weight:2.5 Kg (5.5 lb)
Other features:1750 Hz tone call.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (30 dB S/N)
Squelch sensitivity:Less than 0.25 uV (Threshold)
Noise figure:
Selectivity:16 KHz (-6 dB)
32 KHz (-70 dB)
Image rejection:60 dB
AF output power / speaker:1.5 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 4-8 ohm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:10 W1 W
Modulation system:Variable reactance phase shift
Max FM deviation (Factory set):±7.5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:500 ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Additional info: See also Drake TR-72
New price 1974 in Sweden: SEK 1500:-
Related documents:User manual (6.5 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
PS-5
VFO-30
VFO-30G
Power supply with built-in clock and timer
External VFO
External VFO
An inside top picture of Kenwood TR-7200G
An inside bottom picture of Kenwood TR-7200G
A rear picture of Kenwood TR-7200G