| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
TX: 144-145 MHz
RX: 144-145 MHz
XTAL's for 144.100-144.295 MHz are installed from factory
|
| Tuning steps: | Channelized in 5 KHz steps |
| Frequency stability: | ±? ppm @ -20 to +60°C (-4 to +140°F) |
| Mode: | SSB / CW |
| Channels / memory management: | 40 |
| Repeater shift / offset: | No |
| Power supply: | 11.5-16 VDC (2-pin connector) |
| Current drain / power consumption: | RX: 600 mA (Squelched)
TX: Max 3 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 180-60*240 mm (7.09*2.36*9.45") |
| Weight: | 2.7 Kg (5.95 lb) |
| Other features: | NB. RIT. VXO. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne
IF: 10.7 MHz
|
| Sensitivity: | 0.5 uV (10 dB S/N) |
| Selectivity: | 2.4 KHz (-6 dB)
4.8 KHz (-60 dB) |
| Image rejection: | 60 dB |
| AF output power / speaker: | 1.5 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
~10 W (20 W input)
|
| Modulation system: | Balanced |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 500 ohm / 4-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 197x-197x (Discontinued) |
| Additional info: | |
| Related documents: | Service manual (8.4 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
