RigPix logo

Kenwood/Trio logo


Back to main

Back to Kenwood/Trio

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-15

Valid HTML 4.01 Transitional

Kenwood TM-V708

A picture of Kenwood TM-V708

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: Japanese domestic market
TX: 144-146 / 430-440 MHz
RX: 144-146 / 430-440 MHz
Tuning steps:5 / 6.25 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 / 100 KHz
Frequency stability:±3 ppm @ -10 to +50°C (14 to 122°F)
Mode:FM
Channels / memory management: 200 regular with alpha tags
Repeater shift / offset:±?
Power supply:13.8 VDC
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / ?
Dimensions (W*H*D):Main unit: 140*40*195 mm (5.51*1.57*7.68")
Front panel: 140*60*34 mm (5.51*2.36*1.4")
Weight:Main unit: 1.2 Kg (2.65 lb)
Front panel: 180 g (6.35 oz)
Other features:CTCSS/PL and DTSS. Twin RX.




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
28 KHz (-40 dB)
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighMidLow
2 m:20 W10 W5 W
70 cm:20 W10 W5 W
Modulation system:Reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:600 ohm / 8-pin modular
Microphone input level:? mV




MISCELLANEOUS
Manufactured:2002-200x (Discontinued)
Additional info: This transceiver is similar to TM-D700E but
without the built-in TNC and APRS functionality.
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -