RigPix logo

Kenwood/Trio logo


Back to main

Back to Kenwood/Trio

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-15

Valid HTML 4.01 Transitional

Kenwood TM-201A

A picture of Kenwood TM-201A

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Europe
TX: 144-146 MHz
RX: 144-146 MHz
USA
TX: 142-149 MHz
RX: 142-149 MHz
Tuning steps:5 / 25 KHz (Europe)
5 KHz (USA)
Frequency stability:±15 ppm @ -20 to +50°C (-4 to +122°F)
Mode:FM
Channels / memory management: 5 regular
1 com
RAM storage with lithium battery backup
Repeater shift / offset:±600 KHz
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 500 mA (Squelched)
TX: 2.5 to 5.5 A
Antenna impedance / connector:50 ohm / SO-239 (On pigtail)
Dimensions (W*H*D):141*39*183 mm (5.55*1.54*7.2")
Weight:1.25 Kg (2.76 lb)
Other features:1750 Hz repeater tone (Europe).




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:0.22 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
24 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at 5% distortion / External only
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:25 W5 W
Modulation system:Reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1983-198x (Discontinued)
Additional info:New price, november 1983 in Sweden: SEK 3580:-
Related documents:User manual (4.3 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
FC-10
KPS-7A
MC-48
MC-55
PS-430
TU-3
Remote frequency control
Power supply. 13.8 VDC, 6 A (7 A peak)
Hand microphone with DTMF keypad
Mobile boom microphone
Power supply. 13.8 VDC, 10 A (20 A peak)
CTCSS/PL encoder (USA only)