| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
USA
TX: 144-148 MHz
RX: 144-148 MHz
|
| Tuning steps: | 5 KHz |
| Frequency stability: | ±15 ppm @ -10 to +60°C (14 to 140°F) |
| Mode: | FM |
| Channels / memory management: |
3 regular
2 split
1 com
RAM storage with lithium battery backup
|
| Repeater shift / offset: | ±600 KHz |
| Power supply: | 13.8 VDC ±15% |
| Current drain / power consumption: | RX: 0.5 A (No signal)
TX: 2.5 to 5.6 A |
| Antenna impedance / connector: | 50 ohm / SO-239 (On pigtail) |
| Dimensions (W*H*D): | 140*40*197 mm (5.5*1.6*7.8") |
| Weight: | 1.25 Kg (2.75 lb) |
| Other features: | DCS. Tiltable front panel. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.18 uV (12 dB SINAD) |
| Selectivity: | 12 KHz (-6 dB)
24 KHz (-60 dB) |
| Image rejection: | |
| AF output power / speaker: | 2 W at 5% distortion / External only |
| External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
|
| Modulation system: | Reactance |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Less than -60 dB (Low setting) |
| Microphone impedance / connector: | ? ohm / 8-pin (Metal locking ring connector, on pigtail) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1984-1986 (Discontinued) |
| Additional info: | |
| Related documents: | User manual (2.2 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
CD-10
MC-48
PS-430
TU-3A
|
Callsign display
Hand microphone with DTMF keypad
Power supply. 13.8 VDC, 10 A (20 A peak)
CTCSS/PL tone unit
|
|
