RigPix logo

Icom logo


Back to main

Back to Icom

Next HT/portable


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-32E

A picture of Icom IC-32E

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: Europe
TX: 144-146 / 430-440 MHz
RX: 138-174 / 430-440 MHz
Tuning steps:12.5 / 25 KHz
Frequency stability:? ppm
Mode:FM
Channels / memory management: 20 regular
2 call
2 scan edges
RAM storage with lithium battery backup
Repeater shift / offset:±0 to 9.99 MHz in 10 KHz steps
Power supply:7.2-13.2 VDC (Depending on battery pack)
or 5.5-16 VDC external
Current drain / power consumption:RX: 10-250 mA
TX: 0.9-2.2 A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):65*159*35 mm (2.56*6.26*1.38"), with BP-3
Weight:510 g (1.12 lb), with BP-3
Other features:Splash resistant. Backlit display.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 30.875 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power / speaker:400 mW at 10% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

High
@ 13.2V
Low

2 m:5.5 W1 W
70 cm:5 W1 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:2 Kohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1988-19xx (Discontinued)
Additional info:New price 1988 in Sweden: SEK 4995:-
Related documents: User manual (4.1 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
BP-2
BP-3
BP-4
BP-5
BP-5A
BP-7
BP-8
BP-70
HM-46
UT-40
NiCd battery pack. 7.2 V, 450 mAh
NiCd battery pack. 8.4 V, 270 mAh
Battery case. For six LR6 / AA dry cells or NiCd's
NiCd battery pack. 10.8 V, 450 mAh
NiCd battery pack. 10.8 V, 450 mAh
NiCd battery pack. 13.2 V, 450 mAh
NiCd battery pack. 8.4 V, 800 mAh
NiCd battery pack. 13.2 V, 270 mAh
Speaker-microphone
Tone squelch unit