RigPix logo

Icom logo


Back to main

Back to Icom

Next HT/portable


Copyright logo


Last modified 2021-02-14

Valid HTML 4.01 Transitional

Icom IC-32A

A picture of Icom IC-32A

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: TX: 140-150 / 440-450 MHz (USA)
TX: 144-148 / 430-440 MHz (Australia)
RX: 138-174 / 440-450 MHz (USA)
RX: 144-148 / 430-440 MHz (Australia)
Tuning steps:5 / 10 / 15 / 20 / 25 KHz
Frequency stability:? ppm
Mode:FM
Channels/memory management: 20 regular
2 call
2 scan edges
Lithium battery backup
Repeater shift/offset:0 to 9.99 MHz in 10 KHz steps
Power supply:7.2-13.2 VDC (Depending on battery pack)
or 5.5-16 VDC external
Current drain/power consumption:RX: 10-250 mA
TX: 0.9-2.2 A
Antenna impedance/connector:50 ohm / BNC
Dimensions (W*H*D):65*180*35 mm (2.56*7.09*1.38"), with BP-70
Weight:590 g (1.3 lbs), with BP-70
Other features:Splash resistant. Backlit display.




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 30.875 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power/speaker:400 mW at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

High
@ 13.2V
Low

2 m:5.5 W1 W
70 cm:5 W1 W
Modulation system:Variable reactance frequency modulation
FM deviation:5 KHz
Spurious emissions:Less than -60 dB
Microphone impedance/connector:2 Kohm / ?-pin
Microphone input sensitivity:? mV




MISCELLANEOUS
Manufactured:Japan, 1988-19xx (Discontinued)
Additional info:
Related documents: User manual (4.1 MB)
Modifications:
Reviews:
Options/Accessories:
BP-2
BP-3
BP-4
BP-5
BP-5A
BP-7
BP-8
BP-70
HM-46
UT-40
NiCd battery pack. 7.2 V, 450 mAh
NiCd battery pack. 8.4 V, 270 mAh
Battery case. For six LR6 / AA dry cells or NiCd's
NiCd battery pack. 10.8 V, 450 mAh
NiCd battery pack. 10.8 V, 450 mAh
NiCd battery pack. 13.2 V, 450 mAh
NiCd battery pack. 8.4 V, 800 mAh
NiCd battery pack. 13.2 V, 270 mAh
Speaker-microphone
Tone squelch unit