GENERAL |
Type: | Amateur VHF transceiver |
Frequency range: |
USA
TX: 140-150 MHz
RX: 138-174 MHz
Australia
TX: 144-148 MHz
RX: 138-174 MHz
|
Tuning steps: | 5 / 10 / 15 / 20 / 25 / 100 KHz 1 MHz |
Frequency stability: | ? ppm |
Mode: | FM |
Channels / memory management: |
20 regular
1 call
2 scan edges
RAM storage with lithium battery backup
|
Repeater shift / offset: | ±? KHz |
Power supply: | 5.5-16 VDC |
Current drain / power consumption: | RX: 10-250 mA TX: 0.9-1.8 A |
Antenna impedance / connector: | 50 ohm / BNC |
Dimensions (W*H*D): | 65*151*35 mm (2.56*5.94*1.38"), with BP-70 |
Weight: | 500 g (17.64 oz), with BP-70 |
Other features: | Splash resistant. Backlit display. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: 16.9 MHz
2nd IF: 455 KHz
|
Sensitivity: | 0.25 uV (12 dB SINAD) |
Selectivity: | |
Image rejection: | |
AF output power / speaker: | 400 mW at 10% distortion / 8 ohm |
External speaker connector: | 8 ohm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
NB! The High output level depends on battery pack/voltage
|
Modulation system: | Variable reactance |
Max FM deviation (Factory set): | ±5 KHz |
Spurious emissions: | Better than -60 dB |
Microphone impedance / connector: | 2 Kohm / ?-pin |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 1988-19xx (Discontinued) |
Additional info: | New price 1989 in the US: $379.95 |
Related documents: |
User manual (2.2 MB)
Service manual (11.4 MB)
|
Modifications: | |
Reviews: | |
Options / Accessories: |
BC-25U
BC-27
BP-2
BP-3
BP-4
BP-5
BP-5A
BP-7
BP-8
BP-70
HM-46L
LC-38
LC-39
LC-40
UT-40
|
Battery charger (USA)
Battery charger (Australia)
NiCd battery pack. 7.2 V, 450 mAh
NiCd battery pack. 8.4 V, 270 mAh
Battery case. For six LR6 / AA dry cells or NiCd's
NiCd battery pack. 10.8 V, 450 mAh
NiCd battery pack. 10.8 V, 450 mAh
NiCd battery pack. 13.2 V, 450 mAh
NiCd battery pack. 8.4 V, 800 mAh
NiCd battery pack. 13.2 V, 270 mAh
Speaker-microphone
Carrying case. For use with BP-2, BP-3 and BP-4
Carrying case. For use with BP-5 and BP-70
Carrying case. For use with BP-5A, BP-7 and BP-8
Tone squelch unit
|
|