RigPix logo

Icom logo


Back to main

Back to Icom

Next base VHF/UHF


Copyright logo


Last modified 2020-03-24

Valid HTML 4.01 Transitional

Icom IC-221

A picture of Icom IC-221

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range:144-146 MHz (Japan domestic market)
Tuning steps:100 Hz / 5 KHz
Frequency stability:Less than 1.5 KHz @ -10 to +60 C (14 to 140 F)
Mode:FM/SSB/CW
Channels/memory management:No
Repeater shift/offset:No dedicated. Use VFO A/B split instead
Power supply:Mains: 100 VAC
or 13.8 VDC
Current drain/power consumption:RX: 0.9 to 1.1 A
TX: 1.8 to 3.3 A
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):241*111*264 (9.5*4.4*10.4")
Weight:6.1 (13.5 lbs)
Other features:NB. VOX. Dimmer. SWR-meter.




RECEIVER SECTION
Receiver system:Single conversion superheterodyne (SSB/CW)
IF: 10.7 MHz
Double conversion superheterodyne (FM)
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power/speaker:1.5 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power: 1-10 W
Modulation system:FM: Variable reactance
SSB: Balanced
Max FM deviation:? KHz
Spurious emissions:Less than -60 dB
Microphone impedance/connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input sensitivity:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Additional info: See also: IC-211 (USA version) and IC-211E (European version)
Related documents:
Modifications and fixes:
Reviews:
Options/Accessories:
IC-EX1
IC-EX2
IC-HM5
IC-HP1
IC-RM1
IC-SM2
Extension terminal
Extension terminal with 25 KHz marker
Noise cancelling hand microphone
Headphones
Computerized remote controller
Electret desk microphone