| GENERAL |
| Type: | Amateur HF transceiver |
| Frequency range: |
10-80 m in 8 bands:
3.5-4.0 MHz
7.0-7.3 MHz
14.0-14.5 MHz
21.0-21.5 MHz
28.0-28.5 MHz
28.5-29.0 MHz
29.0-29.5 MHz
29.5-30.0 MHz
|
| Tuning steps: | Analog / continuous |
| Frequency stability: | Less than 100 Hz per hour after 20 minutes warmup |
| Mode: | SSB / CW |
| Channels / memory management: | None |
| Repeater shift / offset: | No |
| Power supply: | Various voltages from separate PSU |
| Current drain / power consumption: | RX: ? W
TX: ? W |
| Antenna impedance / connector: | 50-75 ohm / Phono (RCA) |
| Dimensions (W*H*D): | 378*168*340 mm (14.88*6.62*13.38") |
| Weight: | ? Kg (? lb) |
| Other features: | VOX. 100 KHz calibrator. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
? conversion superheterodyne
|
| Sensitivity: | 1 uV (15 dB S+N/N) |
| Selectivity: |
SSB
2.1 KHz (-6 dB)
5 KHz (-60 dB)
CW
400 Hz (-6 dB)
2 KHz (-60 dB), with optional narrow filter
|
| Image rejection: | >50 dB |
| AF output power / speaker: | 2 W at 10% distortion / 8 and 600 ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| Pwr |
|---|
| SSB (PEP): | ~100 W (180 W input) |
| CW: | ~100 W (170 W DC input) |
Slightly less on 10 m
|
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -45 dB |
| Microphone impedance / connector: | Hi-Z / ?-pin |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | USA, 1967-1970 (Discontinued) |
| Additional info: |
New price 1968 in the US: $370.00 (kit), $540 (assembled as SBW-101)
|
| Related documents: | |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
HDP-21A
HP-13
HP-23
SB-640
SBA-100-1
SBA-301-2
|
Desk microphone
DC power supply
AC power supply
External linear master oscillator
Universal mobile mounting bracket
Narrow CW filter, 400 Hz
|
|
