RigPix logo

Heathkit logo


Back to main

Back to Heathkit / Heath

Next base VHF/UHF


Copyright logo


Last modified 2024-10-01

Valid HTML 4.01 Transitional

Heathkit HW-202

A picture of Heathkit HW-202
The radio on this picture has the tone burst encoder option fitted

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 143.9-148.3 MHz
RX: 143.9-148.3 MHz
Tuning steps:Channelized
Frequency stability:±0.0015% @ -30 to +50°C (-10 to +122°F)
Mode:FM
Channels / memory management: 6 transmit
6 receive
XTAL controlled
Repeater shift / offset:According to XTALs
Power supply:12.6-16 VDC (Male 2-pin plug on pigtail)
Current drain / power consumption:RX: Less than 200 mA (Squelched)
TX: Less than 2.2 A
Antenna impedance / connector:50 ohm / Phono (RCA)
Dimensions (W*H*D):210*70*251 mm (8.25*2.75*9.88")
Weight:1.02 Kg (2.25 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.5 uV (12 dB SINAD)
Squelch sensitivity:0.3 uV (Treshold)
Selectivity:22 KHz (No reference)
Image rejection:45 dB or better
AF output power / speaker:3 W at 10% distortion / 4 ohm
External speaker connector:Phono (RCA), 4 ohm




TRANSMITTER SECTION
RF output power: 10 W (100% duty cycle)
Modulation system:Phase modulation
Max FM deviation (Adjustable):±0 to 7.5 KHz
Spurious emissions:Better than -45 dBc
Microphone impedance / connector:? ohm / 2-pin (Female locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:USA, 1973-1977 (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
HWA-202-1
HWA-202-2
AC power supply. 13.8 VDC, 2.2 A
Tone burst encoder
A rear picture of Heathkit HW-202