| GENERAL |
| Type: | Citizen band transceiver |
| Frequency range: | 26.965-27.405 MHz |
| Channels / tuning steps: | 40 |
| Mode: | AM / SSB |
| Frequency control: | PLL (MB8719) |
| Frequency stability: | 0.001% @ -20 to +50°C (-4 to +122°F) |
| Clarifier or Delta tune: | ±1.25 KHz |
| Power supply: | Mains: 117 VAC ±5%
or 13.8 VDC |
| Current drain / power consumption: | RX: 1-2 A @ 13.8 VDC
TX: Max 3 A @ 13.8 VDC |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 378*119*287 mm (14.88*4.69*11.31"), radio only |
| Weight: | 6.58 Kg (14.5 lb), radio only |
| Other features: |
PA. ANL/NB. Channel 9 button. Digital alarm clock. Dimmer.
AWI. SWR-meter.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne
IF: 7.8 MHz (SSB) - 455 KHz (AM)
|
| Sensitivity: |
AM: 0.5 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
|
| Squelch sensitivity: | Less than 0.5 uV (Treshold) |
| Selectivity: |
AM:
?
SSB:
2.2 KHz (-6 dB)
7.5 KHz (-60 dB)
|
| Image rejection: | 60 dB |
| AF output power / speaker: | 3 W at 10% distortion / External only |
| External speaker connector: | Two TS "Minijacks" (3.5 mm), 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
AM: 4 W
SSB: 12 W (PEP)
|
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / 5-pin (Male locking ring jack) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Taiwan, 1983-198x (Discontinued) |
| Main PCB: | PC-411AD by Uniden |
| Sub PCBs: |
PC-541AB - Clock board
PC-570AB - Power supply board
and others...
|
| Additional info: |
Changes from version 3 is basically the move to a modern
digital alarm clock.
|
| Related documents: |
User manual (421 KB)
PLL: MB8719
|
| Market(s) / Approval(s): |
USA
FCC ID: 1010002
|
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
