RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Uniden logo


Copyright logo


Last modified 2024-09-23

Valid HTML 4.01 Transitional

Uniden Grant XL

A picture of Uniden Grant XL

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (MB8719)
Frequency stability:0.001% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:±1.5 KHz
Power supply:11.7-15.9 VDC (Male 3-pin jack)
Current drain / power consumption:RX: 250-600 mA
TX: Max 2.2 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):200*60*235 mm (7.88*2.38*9.25")
Weight:2.21 Kg (4.87 lb), with microphone
Other features: PA. ANL/NB. SWR-meter. Tone hi-cut. Dimmer.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
IF: 7.8 MHz
Double conversion superheterodyne (AM)
1st IF: 7.8 MHz
2nd IF: 455 KHz
Sensitivity: AM: 0.5 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Squelch sensitivity:Less than 0.25 uV (Treshold)
Selectivity: AM
6 KHz (-6 dB)
18 KHz (-50 dB)
SSB
2.2 KHz (-6 dB)
4.6 KHz (-60 dB)
Image rejection:65 dB
AF output power / speaker:4 W at ?% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm)




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system: AM: High- and low-level class B amplitude modulation
SSB: Balanced modulation
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 5-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Philippines, 1991-199x (Discontinued)
Main PCB: Early (1991 to 1992-ish)
PC-412 by Uniden
Single sided with through-hole components
Later (1993-ish and onwards)
PB-208AB to AD by Uniden
Single sided with through-hole components
Sub PCBs:
Additional info: Was available with silver or black faceplate.
Related documents: User manual (709 KB)
PLL: MB8719
RF driver: 2SC2166
RF final: 2SC1969
Approval / Market: USA
FCC ID: AMW3K2-510
Australia
Complies with MS 312. Approval no: 3120071
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A picture of Uniden Grant XL with black faceplate