GENERAL |
Type: | Citizen band transceiver |
Frequency range: | 26.965-27.255 MHz |
Channels / tuning steps: | 23 |
Mode: | AM |
Frequency control: | XTAL matrix |
Frequency stability: | ?% |
Clarifier or Delta tune: | No |
Power supply: | Mains: 105-129 VAC (Fixed power cord) or 12-16 VDC (3-pin connector) |
Current drain / power consumption: | RX: Max 1.3 A @ 13.8 VDC TX: Max 1.8 A @ 13.8 VDC |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 248*95*203 mm (9.75*3.75*8") |
Weight: | ? Kg (? lb) |
Other features: | PA. ANL. |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: ? MHz
2nd IF: 455 KHz
|
Sensitivity: | 0.5 uV (10 dB S/N) |
Selectivity: | 10 KHz (-40 dB) |
Image rejection: | |
AF output power / speaker: | 3 W at 10% distortion / 8 ohm |
External speaker connector: | 3.5 mm |
|
|
|
|
TRANSMITTER SECTION |
RF output power: | ~3.5 W (5 W input) |
Modulation system: | |
FM deviation (Factory set): | No FM |
Spurious emissions: | Better than -? dB |
Microphone impedance / connector: | 600 ohm / 4-pin (Metal locking ring connector) |
Microphone input level: | 4 mV (For 50% modulation @ 1 KHz) |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 197x-197x (Discontinued) |
Main PCB: |
Relay version
Currently unknown to me
Electronic version
PC-010BA by Uni Electronics Corporation (Now Uniden)
|
Sub PCBs: |
Relay version
Currently unknown to me
Electronic version
PC-??? - Power supply board
|
Additional info: |
This radio was made in two versions. One with relay switching and
one with electronic switching. One had the PA function on the channel
selector while the other had a separate PA button. The front panel was
either in blue color (most common?) or wood grain.
NB! Sams Photofact has documented the relay version.
|
Related documents: | Service manual (3.4 MB). Electronic switching version |
Sams Photofact #: | CB-41 (August 1972) |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
|