RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Teaberry logo


Copyright logo


Last modified 2024-12-13

Valid HTML 4.01 Transitional

Teaberry Stalker Two / Stalker II (4002)

A picture of Teaberry Stalker Two / Stalker II (4002)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:23
Mode:AM / SSB
Frequency control:PLL (Multiple discrete IC's)
Frequency stability:0.005% (No temperature reference)
Clarifier or Delta tune:±1 KHz
Power supply:Mains: 110 VAC (Fixed power cord)
or 13.8 VDC (Male 3-pin jack)
Current drain / power consumption:RX: 600 mA @ 13.8 VDC (Squelched)
TX: Less than 2.5 A @ 13.8 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:PA. NB. SWR meter.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 7.8 MHz
Sensitivity: AM: 0.5 uV (10 dB S/N)
SSB: 0.13 uV (10 dB S/N)
Squelch sensitivity:0.3 uV (Threshold)
1000 uV (Tight)
Selectivity:4.2 KHz (-6 dB)
Image rejection:50 dB
AF output power / speaker:4.5 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm)




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -55 dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:4 mV (For AM 50% modulation / SSB 4 W PEP)




MISCELLANEOUS
Manufactured:Japan, 1976-1977 (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents: Service manual (18.5 MB)
AF amplifier: uPC563H2 or uPC1020H
RF driver: 2SC1306
RF final: 2SC1307
Market(s) / Approval(s): USA
FCC Data: 4002
Sams Photofact #:CB-95 (August 1976)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Teaberry Stalker II (Stalker Two)