| GENERAL |
| Type: | Citizen band / "Freeband" / Export transceiver |
| Frequency range: |
Europe and USA
26.965-27.405 MHz
Export
25.515-27.855 MHz
|
| Channels / tuning steps: | Europe and USA: 40
Export: 120 |
| Mode: | USA: AM / SSB
Europe and export: AM / FM / SSB |
| Frequency control: | PLL (uPD2824C) |
| Frequency stability: | 0.005% @ -30 to +50°C (-22 to +122°F) |
| Clarifier or Delta tune: | ±1.5 KHz |
| Power supply: | Mains: 110 / 220 VAC |
| Current drain / power consumption: | RX: Less than 200 mA @ 220 VAC
TX: Less than 400 mA @ 220 VAC |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 365*95*226 mm (14.38*3.75*8.88") |
| Weight: | 1.45 Kg (3.2 lb) |
| Other features: | ANL/NB. Channel 9 switch. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne (AM/SSB)
IF: 10.695 MHz
Double conversion superheterodyne (FM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
|
| Sensitivity: |
AM: 1 uV (10 dB S/N)
FM: 1 uV (20 dB S/N)
SSB: 0.25 uV (10 dB S/N)
|
| Selectivity: | |
| Image rejection: | More than 60 dB |
| AF output power / speaker: | 3 W at 10% distortion / 16 ohm |
| External speaker connector: | 3.5 mm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
AM: 4 W
FM: 4 W
SSB: 12 W (PEP)
|
| Modulation system: | |
| Max FM deviation (Factory set): | ±2.7 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 500 ohm / 4-pin (Male locking ring jack) |
| Microphone input level: |
~1 mV for 50% modulation (AM)
~1 mV for 6 W (PEP SSB)
~1 mV for ±1 KHz deviation (FM)
|
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | 199x-199x (Discontinued) |
| Main PCB: | PB-122 by Uniden |
| Sub PCBs: |
PA-123AA 1/2 - Front panel board
PA-123AA 2/2 - Channel selector board
PA-241AA - PSU board
PB-189AA . FM board
|
| Additional info: | |
| Related documents: |
Service manual (3.9 MB)
PLL: uPD2824C
|
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
