RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Midland logo


Copyright logo


Last modified 2022-01-19

Valid HTML 4.01 Transitional

Midland 6001 (Early, 79-006) "Precision series"

A picture of Midland 6001 (Early, 79-006) ''Precision series''

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (uPD2816)
Frequency stability:±0.005% @ -30° to +50°C (-22° to +122°F)
Clarifier or Delta tune:±? KHz
Power supply:10-16 VDC (3-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):190*65*280 mm (7.48*2.56*11.02")
Weight:2.25 Kg (4.96 lb)
Other features:PA. ANL/NB. Tone switch.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 10.695 MHz
Sensitivity: AM: 0.7 uV (10 dB S+N/N)
SSB: ? uV
Selectivity:10 KHz (-60 dB)
Image rejection:
AF output power / speaker:3 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -65 dB
Microphone impedance / connector:500 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1979-1980 (Discontinued)
Main PCB:PTBM107AOX by Cybernet Electronics Corporation
Sub PCBs: PTLD051AOX - LED display board
PTSW080AOX - Channel selector board
Additional info:
Related documents: User manual (9.6 MB)
PLL: uPD2816
Sams Photofact #:CB-285 (February 1980)
Modifications and fixes:
Reviews:
Options / Accessories:
- -