RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Hy-Gain logo


Copyright logo


Last modified 2022-12-02

Valid HTML 4.01 Transitional

Hy-Gain 80

A picture of Hy-Gain 80

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range: 26.965-27.855 MHz in two bands:
Lo:   26.965-27.405 MHz
Hi:   27.415-27.855 MHz
Channels / tuning steps:80 (2*40)
Mode:AM
Frequency control:PLL (PLL02A)
Frequency stability:?%
Clarifier or Delta tune:No
Power supply:12-15 VDC (Ten alkaline or twelve NiCd R6/AA batteries)
or 12-15 VDC external (Barrel connector)
Current drain / power consumption:RX: 200-500 mA
TX: Max 1.1 A
Antenna impedance / connector:50 ohm / 3.5 mm or built-in telescopic whip
Dimensions (W*H*D):83*241*53 mm (3.25*9.5*2.1")
Weight:1.6 Kg (3.53 lb), with batteries
Other features:Charging jack.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (10 dB S/N)
Selectivity:20 KHz (-50 dB)
Image rejection:
AF output power / speaker:2 W at ?% distortion / 100 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:~3 W (5 W input)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / Internal or 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Main PCB:PTBH023AOX by Cybernet Electronics Corporation
Sub PCBs:
Additional info:
Related documents: PLL: PLL02A
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -