GENERAL |
Type: | Citizen band transceiver |
Frequency range: | 26.965-27.405 MHz |
Channels / tuning steps: | 40 |
Mode: | AM |
Frequency control: | PLL (PLL02A) |
Frequency stability: | ? ppm |
Clarifier or Delta tune: | No |
Power supply: | 11.5-14.5 VDC (Fixed power cord) |
Current drain / power consumption: | RX: 300 mA (No signal) TX: Less than 1.2 A @ 13.8 VDC |
Antenna impedance / connector: | 50 ohm / SO-239 |
Dimensions (W*H*D): | 162*56*213 mm (6.38*2.2*8.39") |
Weight: | 1.43 Kg (3.15 lb) |
Other features: | |
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
|
Sensitivity: | 0.7 uV (10 dB S+N/N) |
Selectivity: | |
Image rejection: | |
AF output power / speaker: | 3 W at ?% distortion / ? ohm |
External speaker connector: | TS jack (3.5 mm) |
|
|
|
|
TRANSMITTER SECTION |
RF output power: | 4 W |
Modulation system: | |
Max FM deviation (Factory set): | No FM |
Spurious emissions: | Better than -? dB |
Microphone impedance / connector: | ? ohm / 5-pin (DIN 180°) |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | Japan, 1977-197x (Discontinued) |
Main PCB: | PTBM036AOX by Cybernet Electronics Corporation |
Sub PCBs: | None |
Additional info: |
This is basically a 2680 updated with a 40 channel
selector. This was done to take advantage of the newly
expanded CB band in the US at the time.
|
Related documents: |
Model A and X 40 channel addendum (41 MB)
PLL: PLL02A
|
Sams Photofact #: | None |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
|