RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Copyright logo


Last modified 2022-01-16

Valid HTML 4.01 Transitional

Eagle II / Eagle 2 (By Eagle Electronics)

A picture of Eagle II / Eagle 2 (By Eagle Electronics)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:23
Mode:AM
Frequency control:XTAL-matrix (14 XTALs)
Frequency stability:±?%
Clarifier or Delta tune:±? KHz
Power supply:13.8 VDC (Fixed power cord)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):190*60*215 mm (7.48*2.36*8.46")
Weight:2.25 Kg (4.96 lb)
Other features:PA. ANL. Delta tune.




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
Sensitivity:0.6 uV (10 dB S/N)
Selectivity:4 KHz (-6 dB)
40 KHz (-60 dB)
Image rejection:
AF output power / speaker:5 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm (TS)




TRANSMITTER SECTION
RF output power:~3.5 W (5 W input)
Modulation system:
FM deviation (Factory set):No FM
Spurious emissions:Better than -50 dB
Microphone impedance / connector:? ohm / 6-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-197x (Discontinued)
Main PCB: W-00001-2
Single sided with through hole components.
Sub PCBs:
Additional info: The S-version is for the Swedish market, modified with a
selcall jack on the rear panel.
Related documents:Schematic diagram (2.4 MB)
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Eagle II / Eagle 2