RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next mobile

Cobra logo

Copyright logo

Last modified 2022-01-13

Valid HTML 4.01 Transitional

Cobra 29 GTL (By Dynascan)

A picture of Cobra 29 GTL (By Dynascan)


Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Frequency control:PLL (uPD2816)
Frequency stability:Max ? ppm
Clarifier or Delta tune:? KHz
Power supply:13.8 VDC (3-pin connector)
Current drain / power consumption:RX: 0.3-1,2 A
TX: Max 1.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):185*56*219 mm (7.28*2.2*8.62")
Weight:2.09 Kg (4.6 lb)
Other features:PA. ANL/NB. Tone hi-cut. Dimmer. SWR-meter.

Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (10 dB S+N/N)
Selectivity:7 KHz (-6 dB)
10 KHz (-60 dB)
Image rejection:50 dB
AF output power / speaker:3 W at 7% distortion / 16 ohm
External speaker connector:3.5 mm, 8 ohm

RF output power:4 W
Modulation system:High- and low-level Class B amplitude modulation
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:Hong Kong (Early) and Taiwan (Later), 197x-19xx (Discontinued)
Main PCB:PC-424AC by Uniden
Sub PCBs:
Additional info:FCC data: 309
Related documents:User manual (4.2 MB)
Sams Photofact #:CB-217 (September 1978)
Modifications and fixes:
Options / Accessories:
- -