RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Cobra logo


Copyright logo


Last modified 2024-10-29

Valid HTML 4.01 Transitional

Cobra 139XLR (By Dynascan)

A picture of Cobra 139XLR (By Dynascan)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (uPD858C)
Frequency stability:0.001% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:±600 Hz "Voice lock"
Power supply:Mains: 108-132 VAC (Fixed power cord)
or 11.7-15.9 VDC (Male 3-pin jack)
Current drain / power consumption:RX: 1-2 A @ 13.8 VDC
TX: Max 2.8 A @ 13.8 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):343*127*330 mm (13.5*5*13")
Weight:4.54 Kg (10 lb)
Other features:PA. ANL/NB. SWR meter.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
7.8 MHz
Sensitivity: AM: 0.75 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Squelch sensitivity:Less than 0.5 uV (Treshold)
Selectivity: AM and SSB
4.2 KHz (-6 dB)
7 KHz (-60 dB)
Image rejection:50 dB
AF output power / speaker:3.5 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




TRANSMITTER SECTION
RF output power: AM: 4 W
SSB: 12 W
Modulation system:AM: High- and low-level Class B
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1977-197x (Discontinued)
Main PCB:PC-176 by Uniden
Sub PCBs: PC-006 - PSU board
Additional info:
Related documents: User manual (3.5 MB)
Schematic diagram (2.6 MB)
RF driver: 2SC1306
RF final: 2SC1307
Market / Approval: USA
FCC Data: 139XLR
Sams Photofact #:CB-127 (July 1977)
Modifications and fixes:
Reviews:
Options / Accessories:
- -