RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Cobra logo


Copyright logo


Last modified 2024-10-29

Valid HTML 4.01 Transitional

Cobra 132 XLR (By Dynascan)

A picture of Cobra 132 XLR (By Dynascan)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (Multiple discrete IC's)
Frequency stability:0.001% @ -30 to +50°C (-22 to +122°F)
Clarifier or Delta tune:AM: ±1.5 KHz. SSB: ±1 KHz "Voice lock"
Power supply:11.7-15.9 VDC (Fixed power cord)
Current drain / power consumption:RX: 0.5-1.5 A
TX: Max 3 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):191*60*278 mm (7.52*2.36*10.94")
Weight:3.49 Kg (7.7 lb)
Other features:PA. NB/ANL. Dimmer. SWR and modulation meter.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 7.8 MHz - Crystal filter: Nikko Denshi Co.Ltd. K07F4A
Sensitivity: AM: 0.5 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Squelch sensitivity:Less than 0.5 uV (Treshold)
Selectivity: AM / SSB:
3.8 KHz (-6 dB)
10 KHz (-50 dB)
Image rejection:50 dB
AF output power / speaker:4 W at 10% distortion / 16 ohm
External speaker connector:TS "Minijack" (3.5 mm), 8 ohm




TRANSMITTER SECTION
RF output power:AM: 4 W
SSB: 12 W (PEP)
Modulation system: AM: High and low level class B
SSB: Balanced
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1976-1978 (Discontinued)
Main PCB: KNTA001 C by Toshiba?
Double sided with through-hole components
Sub PCBs:
Additional info: Relay switched RX/TX.
Related documents: User manual (7.3 MB)
Schematic diagram + BOM (450 KB)
AF amplifier: TA7205P
Market / Approval: USA
FCC Data: 132XLR
Sams Photofact #:CB-179 (March 1978)
Modifications and fixes:
Reviews:
Options / Accessories:
- -