RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Alinco logo


Copyright logo


Last modified 2022-11-21

Valid HTML 4.01 Transitional

Alinco DR-135CB (Generation 1)

A picture of Alinco DR-135CB (Generation 1)

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range:TX: 26-33 MHz
RX: 26-40 MHz
Channels / tuning steps:5 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz
Mode:FM
Frequency control:PLL
Frequency stability:±7 ppm (No temperature reference)
Clarifier or Delta tune:No
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 400-600 mA
TX: Max 3 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):140*40*174 mm (5.51*1.57*6.85")
Weight:1 Kg (2.2 lb)
Other features: CTCSS/PL and DCS. 100 memories + 1 call. PC programmable.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 450 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
28 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: High: 10 W
Mid: 5 W
Low: 1 W
Modulation system:Variable reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -40 dB
Microphone impedance / connector:2 Kohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 200x-201x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:This version appears to have been sold mainly in Russia.
Related documents:
Sams Photofact #:
Modifications and fixes:
Reviews:
Options / Accessories:
- -