RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Alinco logo


Copyright logo


Last modified 2022-11-21

Valid HTML 4.01 Transitional

Alinco DR-135CB (Generation 2)

A picture of Alinco DR-135CB (Generation 2)

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range:25.615-30.150 MHz
Channels / tuning steps:360 (6*60) or 10 / 100 Hz, 1 / 10 KHz steps
Mode:AM / FM / SSB / CW
Frequency control:PLL
Frequency stability:?%
Clarifier or Delta tune:No
Power supply:13.8 VDC ±15% (3-pin connector)
Current drain / power consumption:RX: ? mA
TX: Max ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):170*52*215 mm (6.69*2.05*8.46")
Weight:1.4 Kg (3.09 lb)
Other features: ANL/NB. Backlit front panel. PC programmable. Dual watch. Tone hi-cut.
Digital echo. +10 KHz button. Roger beep. Multi-color backlite.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB/CW)
IF: 10.695 MHz
Double conversion superheterodyne (AM/FM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity: AM: 1 uV (10 dB S+N/N)
FM: 1 uV (20 dB S+N/N)
SSB/CW: 0.25 uV (10 dB S+N/N)
Selectivity: AM/FM
3 KHz (-6 dB)
9 KHz (-50 dB)
SSB/CW
2.1 KHz (-6 dB)
3.3 KHz (-60 dB)
Image rejection:65 dB
AF output power / speaker:3 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: AM: 12 W
FM: 12 W
SSB: 25 W (PEP)
CW: 12 W
Modulation system:
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 6-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:China (By AnyTone), 2015-20xx
Main PCB:Mainly SMD components
Sub PCBs:
Additional info:This version appears to be sold mainly in Russia.
Related documents: RF pre -driver: 2SC2314
RF driver: IRF520
RF final: Two IRF520
Sams Photofact #:
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Alinco DR-135CB (Generation 2)