RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Alan logo


Copyright logo


Last modified 2023-07-17

Valid HTML 4.01 Transitional

Alan 88S (By CTE International)

A picture of Alan 88S (By CTE International)

SPECIFICATIONS

Japan, 198x-198x (Discontinued)
GENERAL
Type:Citizen band transceiver
Frequency range:26.865-27.265 MHz
Channels / tuning steps:34 (Italy)
240 (after modification)
Mode:AM / FM / SSB
Frequency control:PLL (AN6040)
Frequency stability:Max ? ppm
Clarifier or Delta tune:±? Hz
Power supply:13.8 VDC (2-pin connector)
Current drain / power consumption:RX: ? mA
TX: Max 1.2 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):185*63*247 mm (7.28*2.48*9.72")
Weight:2 Kg (4.41 lb)
Other features:PA. ANL/NB. 3-step tone switch. Dimmer.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.5 uV (10 dB S+N/N)
Selectivity:3 KHz (-6 dB)
Image rejection:50 dB
AF output power / speaker:3 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power: AM/FM: 2.5 W
SSB: 4.8 W
Modulation system:
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:19xx-19xx (Discontinued)
Main PCB:PCMA001S by Cybernet Electronics Corporation
Sub PCBs: PCLD001 - LED channel display
PCSW001S - Channel selector board
Additional info:
Related documents:Schematic diagram (1.2 MB)
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
PK 240/88 C297 240 channel board