| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
TX: 144-146 MHz
RX: 144-146 MHz
|
| Tuning steps: | Continuous |
| Frequency stability: | ±? ppm |
| Mode: | AM / FM / SSB / CW |
| Channels / memory management: | None |
| Repeater shift / offset: | No dedicated. Use RX/TX VFO split instead |
| Power supply: | Mains: 220 VAC
or 12 VDC |
| Current drain / power consumption: |
RX: Max 2.8 A @ 12 VDC - Max 27 VA @ mains
TX: Max 7.9 A @ 12 VDC - Max 75 VA @ mains
|
| Antenna impedance / connector: | 50-60 ohm / SO-239 |
| Dimensions (W*H*D): | 420*160*260 mm (16.54*6.3*10.24") |
| Weight: | 15.2 Kg (34 lb) |
| Other features: | NIXIE-tube display. VOX. 1750 Hz tone call (1400-2000 Hz adjustable) |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne
IF: 10.7 MHz
|
| Sensitivity: |
AM: 0.17 uV (10 dB S/N)
FM: 0.23 uV (10 dB S/N)
SSB/CW: 0.11 uV (10 dB S/N)
|
| Squelch sensitivity: | |
| Noise figure: | 2.5 dB (1.8 kTo) |
| Selectivity: |
AM: 6 KHz (-3 dB), 12 KHz (-60 dB)
FM: 15 KHz (-3 dB), 30 KHz (-60 dB)
SSB/CW: 2.4 KHz (-3 dB), 4.4 KHz (-60 dB)
|
| Image rejection: | |
| AF output power / speaker: | 1 W at ?% distortion / ? ohm |
| External speaker connector: | 4-8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| AM: | 12 W |
| FM: | 12 W |
| SSB (PEP): | 40 W |
| CW: | 12 W |
|
| Modulation system: | |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -80 dB |
| Microphone impedance / connector: | 200-1000 ohm or Hi-Z / 5-pin DIN (180°) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | West Germany, 1973-197x (Discontinued) |
| Additional info: |
New price 1974 in Sweden: SEK 9744:-
New price, august 1974 in the UK: £780.00
|
| Related documents: |
User manual (7.1 MB)
Voltage stabilizer: OA2
RF final: QQE03/12
BCD-to-decimal decoder/Nixie driver: SN74141
|
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
