GENERAL |
Type: | Amateur HF/VHF SDR transceiver |
Frequency range: |
TX: 10-160 m + WARC / 6 m
RX: 0.09-60 MHz
|
Tuning steps: | Down to 1 Hz |
Frequency stability: | ±0.1 ppm (No temperature reference) |
Mode: | AM / FM / SSB / CW / Digital |
Channels / memory management: |
Depending on software
|
Repeater shift / offset: | Depending on software |
Power supply: | 13.8 VDC (PowerPole connectors) |
Current drain / power consumption: | RX: 4 A TX: Max 25 A |
Antenna impedance / connector: | 50 ohm / Three BNC (RX/TX) and one BNC (RX only) |
Dimensions (W*H*D): | 300*130*355 mm (11.81*5.12*14") |
Weight: | 6 Kg (13.23 lb) |
Other features: |
Integrated SDR and Win 10 PC (i5 or i7 CPU) with a 7" 1024*600 touchscreen
for standalone use. Spectral noise blanker. Two phase synchronous front ADC:s
to enable diversity reception. Hardware support for seven independent receivers
assignable to either ADC. 6 m LNA. 1-30 dB step attenuator. Transverter jack.
10 MHz reference input. Pure signal pre-distortion. USB and LAN connectors.
|
|
|
|
|
RECEIVER SECTION |
Receiver system: |
Direct down conversion
Dual 16-bit phase synchronous ADC:s
|
Sensitivity: | |
Selectivity: | |
Image rejection: | 90 dB |
AF output power / speaker: | ? W at ?% distortion / 8 ohm |
External speaker connector: | Two 6.25 mm (1/4") |
|
|
|
|
TRANSMITTER SECTION |
RF output power: |
AM: 1-30 W
FM/SSB/CW/RTTY: Max 100 W
|
Modulation system: | Direct up conversion |
Max FM deviation (Factory set): | Depending on software |
Spurious emissions: | HF: Better than -43 dBc 6 m: Better than -60 dBc |
Microphone impedance / connector: | ? ohm / ?-pin modular |
Microphone input level: | ? mV |
|
|
|
|
MISCELLANEOUS |
Manufactured: | 2020-202x |
Additional info: | New price, december 2022 from the manufacturer: $4395.00 |
Related documents: | User manual (7.8 MB) |
Modifications and fixes: | |
Reviews: | |
Options / Accessories: |
?
|
Automatic antenna tuner unit
|
|