| GENERAL |
| Type: | Amateur HF/VHF SDR transceiver |
| Frequency range: |
TX: 10-160 m + WARC / 6 m
RX: 0.09-60 MHz
|
| Tuning steps: | Down to 1 Hz |
| Frequency stability: | ±0.1 ppm (No temperature reference) |
| Mode: | AM / FM / SSB / CW / Digital |
| Channels / memory management: |
Depending on software
|
| Repeater shift / offset: | Depending on software |
| Power supply: | 48 VDC (PowerPole connectors) |
| Current drain / power consumption: | RX: 1 A
TX: Max 20 A |
| Antenna impedance / connector: | 50 ohm / Three SO-239 /RX/TX) and one BNC (RX only) |
| Dimensions (W*H*D): | 430*120*330 mm (16.93*4.72*13") |
| Weight: | 12 Kg (26.46 lb) |
| Other features: |
Two phase synchronous front ends to enable diversity reception.
CPU controlled protection for SWR, temperature, voltage and current.
Hardware support for 7 independent receivers assignable to either ADC.
10 and 6 m LNA. 1-30 dB step attenuator. Transverter jack. Ethernet connector.
10 MHz reference input.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Direct down conversion
Dual 16-bit synchronous ADC:s with independent filter banks
|
| Sensitivity: | |
| Selectivity: | |
| Image rejection: | 100 dB |
| AF output power / speaker: | ? W at ?% distortion / No internal speaker |
| External speaker connector: | Two 6.25 mm (1/4") |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
AM: 1-200 W
FM/SSB/CW/RTTY/Digital: Max 500 W
|
| Modulation system: | Direct up conversion |
| Max FM deviation (Factory set): | Depending on software |
| Spurious emissions: | HF: Better than -50 dB
6 m: Better than -60 dB |
| Microphone impedance / connector: | ? ohm / 3.5 mm and 6.25 mm (1/4") |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | 2022-202x |
| Additional info: | Pre-order price, december 2022 from the manufacturer: $3795.00 |
| Related documents: | |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
