RigPix logo

Apache Labs logo


Back to main

Back to Apache Labs

Next HF and more


Copyright logo


Last modified 2022-12-22

Valid HTML 4.01 Transitional

Apache Labs Anan-100

A picture of Apache Labs Anan-100

SPECIFICATIONS

GENERAL
Type:Amateur HF/VHF SDR transceiver
Frequency range: TX: 10-160 m + WARC / 6 m
RX: 0.01-55 MHz
Tuning steps:? KHz
Frequency stability:±? ppm
Mode:Depending on software
Channels / memory management: Depending on software
Repeater shift / offset:Depending on software
Power supply:13.8 VDC
Current drain / power consumption:RX: ? mA
TX: Max ? A
Antenna impedance / connector:50 ohm / Three BNC
Dimensions (W*H*D):265*80*220 mm (10.4*3.15*8.66")
Weight:? Kg (? lb)
Other features: Supports two independent receivers. Each receiver can display 48/96/192/384/1152 KHz
of spectrum. Full QSK. Ethernet connection.




RECEIVER SECTION
Receiver system: Direct conversion
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:1 W at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: Max 100 W
Modulation system:
Max FM deviation (Factory set):Depending on software
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 3-pin (Phantom voltage for electret mike, switchable)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:India, 201x-201x (Discontinued)
Additional info:
Related documents:User manual (3.7 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Apache Labs Anan-100