RigPix logo

Apache Labs logo


Back to main

Back to Apache Labs

Next HF and more


Copyright logo


Last modified 2022-12-22

Valid HTML 4.01 Transitional

Apache Labs Anan-100D

A picture of Apache Labs Anan-100D

SPECIFICATIONS

GENERAL
Type:Amateur HF/VHF SDR transceiver
Frequency range: TX: 10-160 m + WARC / 6 m
RX: 0.01-55 MHz
Tuning steps:Down to 1 Hz, depending on software
Frequency stability:±? ppm
Mode:Depending on software
Channels / memory management: Depending on software
Repeater shift / offset:Depending on software
Power supply:13.8 VDC
Current drain / power consumption:RX: ? mA
TX: Max ? A
Antenna impedance / connector:50 ohm / Three BNC (RX/TX) and one BNC (RX only)
Dimensions (W*H*D):265*80*220 mm (10.4*3.15*8.66")
Weight:4.5 Kg (9.92 lb)
Other features: Three front ends of which two are independent phase coherent.
Up to 1.152 MHz spectrum display. Full duplex, any split over
the entire range. Ethernet connection. Diversity capable.




RECEIVER SECTION
Receiver system: Direct conversion
Sensitivity:
Selectivity:
Image rejection:100 dB
AF output power / speaker:1 W at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: 1-100 W
Modulation system:Digital low level
Max FM deviation (Factory set):Depending on software
Spurious emissions:HF: Better than -50 dB
VHF: Better than -60 dB
Microphone impedance / connector:? ohm / 3-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:India, 201x-201x (Discontinued)
Additional info:
Related documents:User manual (3.7 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Apache Labs Anan-100D